Home proteus; PCB Design with Proteus

PCB Design with Proteus

 


Learn to Design Printed Circuit Board with Proteus | PCB Design | 6 hours


What will you learn? 
    - Design a printed circuit board with Proteus
    - Design a PCB with 1 or 2 Layers

Requirements
    - Basic Electronic knowledge 
    - Proteus Software 
    - Basic Computer Knowledge 
    - Eager to learn

Description
In this course We are going to cover all the necessary aspect to design a high quality printed circuit board. This is a step by step course. We are going to start in the squematic circuit then the PCB layout and get the 3d visualization, also We are going to learn how to get the output files like PDF and Gerber files. Let's get started¡¡¡

We will cover the complete process to design a PCB with Proteus, and see the below subjects


1. The use of Proteus as PCB Desing Software

Proteus is not just an Virtual Electronic Laboratory with different modules, in this course We are using Proteus as PCB Design software, since it has a powerful and dynamic interface.

We will learn:
   - How to navegate in the Proteus interface.
   - Understand the working methodology in Proteus.
   - The different files that We will create (Schematic & Footprint Library)


2. The Schematic & Schematic Library

In Proteus We can create an Schematic Library, where we are going to collect all our Projects schematic symbols. It is better to separate our Projects symbols from the Proteus Library Symbols. So in this way We can be sure about the components We are using, in additional when we are going to share our Project File everything will be well separated and idetificated.

We will learn:

   - How to create the schematic library.
   - How to create new schematic symbols.
   - How to use the schematic symbols from Proteus Library.
   - How to modify the schematic symbols from Proteus Library.
   - How to add the new symbols into our schematic library.
   - How to identify our schematic library and where to find it.
   - Complete our Schematic Diagram.


3. PCB Layout & Footprint Library

Once we complete our schematic diagram, We are going to pass to the PCB Layouy interface. Where we finally will make the layout of our project. After we complete this step, we can get all the out files to create our pcb.

We will learn:

   - How to create the Footprint Library.
   - How to create new Footprints and add them into our library.
   - How to modify the Footprint from Proteus Library.
   - How to identify our Footprint library and where to find it.
   - How to use the Autorouting option.
   - How to route our PCB ( 1 & 2 layers pcb)
   - Understand the PCB Layout terminology.


4. Visualization 3D

Proteus offers the 3d Visualization, which we can consider necesary, it will be kind of confirmation between our models and the real component. We add easly the 3d models and get our 3d PCB that we can share.

We will learn:

   - How to add 3d models.
   - How to Switch to the 3d view.
   - How to set the 3d pcb (Colors, visual options, Copper, 3d models)
   - Where to find new 3d models.
   - Which extension for 3d model we need to use.
   - Export our 3d pcb.


5. Manufacturer Files

The manfacturer files are the final files that we need to get from our Project, and with them we are going to create the pcb in real. Process will provide these information after we complete the layout of our pcb.

We will learn:

   - How to get the Gerber Files.
   - How to get the PDF files (Top and Bottom Copper layer )
   - How to order our PCB from PCB factory.


Who can take this course?
    - PCB Designers 
    - Makers 
    - Electronic 
    - Enthusiasts 
    - Electronic 
    - Hobbyists 
    - Electronic Lover 
    - Proteus Users

Course Content:
    - Course Intro - Project # 1 : https://youtu.be/-97OUl82Fq4
    - Course Intro - Project # 2 : https://youtu.be/9UmBCf4VJFI

1. Section #1: First Steps - 7 Lesson (17 min)
    - Creating a New Project (01:49 min)
    - Edit the tittle Block (02:14 min)
    - Set Keyboard Shortcuts (02:45 min)
    - Manage Components (02:02 min)

2. Section #2: Schematic Design - 9 Lesson (35min)
    - Schematic Circuit (01:58 min)
    - Create a New Schematic Library (02:15 min)
    - Creating the Connector ( 05:17 min) 
    - Creating the Resistors (05:58 min)
    - Creating the Potentiometer ( 03:25 min)
    - Creating the 555 Timer (05:14 min)
    - Connecting the Schematic (04:00 min) 
    - Adding  Tags Terminal Modes (03:32 min)
    - Finishing the Schematic (02:51 min)
    
3. Section #3: PCB Layout - 18 Lesson (1h 35min)
    - Switching from Schematic to PCB Layout (04:26 min)
    - Basic PCB Layout Terminology (02:59 min)
    - Create a Footprint Library (02:20 min)
    - Creating the Resistors Footprints (07:33 min)
    - Creating the Potentiometer Footprint (06:44 min)
    - Creating the Diode Led Footprint (12:12 min)
    - Creating the 555 Timer Footprint (05:33 min)
    - Placing the Footprint (05:19 min)
    - Creating the PCB Border (03:22 min)
    - Desing Rule Manger (03:30 min)
    - Autorouting (06:42 min)
    - Manual Routing - Tracks (08:50 min)
    - Teardrop (03:04 min)
    - Power Plane Generator (04:20 min)
    - Adding Text and Logo (06:17 min)
    - Placing holes (02:30 min)

4. Section #4: 3D Visualization - 5 Lesson (21 min)
    - 3D Navigation (03:19 min)
    - Adding 3D Componets (08:04 min)
    - Setting the 3D PCB (03:53 min)
    - Where to find 3D components (01:38 min)
    - Donwloading 3d Model (Step AP214) (03:50 min)

5. Section #5: PCB Manufacturing - 4 Lesson (13 min)
    - PCBWay (01:45 min)
    - Ordering the PCB on PCBWay (08:23 min)
    - Receiving the PCB (01:20 min) 
    - Building and Testing the PCB (01:22 min)

6. Section #6: Project Nro 2: IR Sensor/FC-51 - 18 Lesson (2h 8 min)
    - Introduction to the Second Project (00:42 min)
    - Creating the Project & Creating the Schematic Library (03:41 min)
    - Creating the Resistor and potenciometer (08:38 min)
    - Creating Diode Led, Led IR and Phototransistor (06:44 min)
    - Finishing the Schematic Circuit (10:20 min) 
    - Switching to PCB Layout & Creating the Footprint Library (02:26 min)
    - Creating 0805 Resistor Footprint (12:53 min)
    - Creating 0805 Capacitor Footprint (05:29 min)
    - Creating 0805 Led Footprint (08:35 min)
    - Creating the IR Led and Phototransistor footprint (06:25 min)
    - Creating the 10k potenciometer Footprint (09:19 min) 
    - Creating the Comparator LM393 SMD SOIC Footprint (05:36 min)
    - Creating male pin header Footprint (02:34 min)
    - PCB Border and placing the footprint (14:07 min)
    - Routing the PCB (09:20 min)
    - Adding the 3d models (09:11 min)
    - Finishing the PCB (03:43 min)

7. Section #7: Conclusion - 1 video (1 min)
    - Thank you to take this course

8. Section #8: Video Responses - 3 Lesson (17 min)
    - Q1: How can I make simulation for example with my own made resistor? (10:53 min)
    - Q2: How to create a new Library in a higher version of Proteus 8.6? (02:05 min)
    - Q3. Drill Files & Flatcam (04:00 min) 


TAKE THE COURSE:






PCB Design with Proteus PCB Design with Proteus Reviewed by PCB Designer on 7:48 a.m. Rating: 5

3 comentarios:

Suscribirse a: Comentarios de la entrada ( Atom )
Con tecnología de Blogger.